ACCESSORIES
Cod: Z0295AA
Earth cable and clamp 35/50
Cable section: 35mm2.
length: 4m
Plug: 50
Cod: Z0297AA
STICK WELDING TORCH 35/50
Cable section: 35mm2
length: 4m
Plug: 50
Cod: Z0030AA
Tig standard torch
Torch switch: 1
Switch type: Classic
Up/Dw switch: 0
Finish: Classic
Length: 4m
Use in DC mode: 180A (ED=35%)
Use in AC mode: 150A (ED=35%)
Cooling system: Air
Cod: Z0031AA
Tig special torch with remote controls on the handle
Torch switch: 1
Switch type: Classic
Up/Dw switch: 4sw
Finish: Classic
Length: 4m
Use in DC mode: 180A (ED=35%)
Use in AC mode: 150A (ED=35%)
Cooling system: Air
PRODUCTS BELONGING TO THE SAME CATEGORY
|
TIG 200 AC/DC
AC/DC Tig welding Power source with HF arc starting, compact, portable, without wheels, powered by an AC/DC 200 amp power inverter, with a supply voltage of 230V single-phase.
|
RILAND T200P
The TIG 200P professional tig welder with the very latest in inverter technology.
|
TER T200 PD
Portable Power source Inverter, with a supply voltage of 230Vac single-phase, usable for lots of welding's modes such as TIG DC, Pulsed TIG DC, TIG DC Mix Arc, with an arc starting reached through a HF device.
|
TER T200 PD PFC
Portable Power source Inverter, with a supply voltage between 110Vac and 230Vac single-phase, it has a PFC device for the reduction and optimisation of the power consumption and it's usable for lots of welding's modes such as TIG DC, Pulsed TIG DC, TIG DC Mix Arc, with an arc starting reached through a HF device.
|